1/10th Off-road Vehicles HB Racing D2 Evo 1/10th 2WD buggy juin 21, 2022 by Chris Laisser un commentaire HB Racing have introduced their new D2 Evo 1/10th 2WD buggy. The D2 Evo was designed for total adjustability. Out of all the RC car racing categories, the 1/10 scale off-roaders are the most difficult to design because they race on a wide range of track surfaces, a wide variety of tires and even different tire sizes. As shown in the list of features, the D2 Evo covers that range. We’ve also implemented design features from our other kits to enhance this car, like machined aluminum components for higher precision and durability, monocoque suspension arms which have been a staple of HB off-roaders for the past decade, and droop screws which are ubiquitous in 1/8 scale but should add a level of convenience for 1/10 2WD. Shopping! Wartelle Shop Shopping! RC Team Shopping! Absolute Hobbyz Features: Aluminum front arm mounts with optional adjustable kickupMonocoque suspension arms with carbon fiber inserts as pioneered by HB in 1/8 scale & 1/10 4WDGullwing suspension arm design front & rearAluminum caster blocks with caster adjustment bushings includedAdjustable Ackermann geometry via optional steering hub armsAdjustable droop setting via droop screws similar to 1/8 scale buggiesBall bearing supported steering bellcranks with aluminum steering rackFlat plate aluminum chassis so optional materials like carbon fiber can be used depending on racing conditionsAdjustable battery position with quick change O-ring retainersMotor cooling fan mounts built into the side guardsDual disc adjustable slipper clutchMachined aluminum gearbox with 3-gear laydown configurationEasy access differential (ball & gear diff available)Aluminum rear hubs with inserts for various hinge pin heightsFully adjustable camber link position using spacersBoth inboard and outboard camber mounts can be finely adjusted up & down as well as inward & outwardClamping aluminum wheel hex drivesArm mount inserts for toe-in and anti-squat adjustment Notes from D2 Evo designer’s Torrance Deguzman: The D2 Evo was designed for total adjustability. Out of all the RC car racing categories, the 1/10 scale off-roaders are the most difficult to design because they race on a wide range of track surfaces, a wide variety of tires and even different tire sizes. As shown in the list of features, the D2 Evo covers that range. We’ve also implemented design features from our other kits to enhance this car, like machined aluminum components for higher precision and durability, monocoque suspension arms which have been a staple of HB off-roaders for the past decade, and droop screws which are ubiquitous in 1/8 scale but should add a level of convenience for 1/10 2WD. Source: HB Racing PartagezTweetezEnregistrer0 PartagesAbout ChrisFounder of circusrc.com, journalist & photographer in the RC world for several years, Chris is passionate about RC, racing and technique. Whether in France or in the world, he is trying to bring high-quality information and photos for enthusiasts... and make you want to join the world of RC!